Installation Procedure

Fig 1: View Of I/P Trim Plate

Courtesy of GENERAL MOTORS CORP.

Align the I/P outboard trim plate retainers to the slots in the I/P trim pad. Press the trim plate to the I/P trim pad.

Fig 2: View Of I/P Accessory Trim Plate

Courtesy of GENERAL MOTORS CORP.

Install the I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory .

Fig 3: View Of Upper Door Stop

Courtesy of GENERAL MOTORS CORP.

Engage the door stop using the following procedure:
1. Press the upper door stop (2) toward the center of the vehicle.
2. Rotate the door up to the compartment.
Close the I/P compartment.