LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Grand Prix GTP >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Plate Replacement - Instrument Panel (I/P) Accessory >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Ignition Cylinder Bezel
    GM910510Courtesy of GENERAL MOTORS CORP.
  1. Use a plastic trim tool to remove the ignition switch bezel.
    2. Fig 2: View Of I/P Accessory Trim Plate
    GM928809Courtesy of GENERAL MOTORS CORP.
  2. Pull the instrument panel (I/P) accessory trim plate rearward.
    3. Fig 3: Electrical Connector & Driver Information Display
    GM928828Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector from the driver information display assembly.
  4. Remove the driver information display screws.
  5. Remove the driver information display.
    6. Fig 4: I/P Center Air Outlet & Screws
    GM928622Courtesy of GENERAL MOTORS CORP.
  6. Remove the I/P center air outlet screws.
  7. Remove the I/P center air outlet.
  8. Remove the I/P accessory trim plate.
scientia non olet · About LEMON Manuals