Engine Oil Pressure Indicator Always On (5.3L)
Engine Oil Pressure Indicator Always On (5.3L)
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Instrument Cluster Schematics Connector End View Reference: ENGINE CONTROLS CONNECTOR END VIEWS in Engine Controls - 5.3 L or to Inline Harness Connector End Views |
|||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
| 2 | Start the engine. Does the engine oil pressure indicator illuminate after the displays test? |
Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
| 3 | Replace the instrument panel cluster (IPC). Refer to Control Module References
in Computer/Integrating Systems for replacement, setup and programming. Did you complete the replacement? |
Go to Step 4 | - |
| 4 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 2 |