LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> GTO Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Striker Replacement - Instrument Panel (I/P) Compartment >> Installation Procedure

Installation Procedure

    Fig 1: View Of Instrument Panel, Door, Lock Striker, Bumper Stop, Lugs & Screws
    GM1357338Courtesy of GENERAL MOTORS CORP.
  1. Install the instrument panel compartment door lock striker (2) to the instrument panel (1).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the two screws (3) attaching the instrument panel compartment door lock striker (2) to the instrument panel (1).

    Tighten:  Tighten the two screws to 2 N.m (18 lb in).

  3. Close the instrument panel compartment door (6).
scientia non olet · About LEMON Manuals