LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> GTO Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Hinge Replacement - Floor Console Arm Rest >> Installation Procedure

Installation Procedure

    Fig 1: View Of Armrest, Latch, Hinge, Inner Panel & Screws
    GM1356405Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the hinge (8) to the armrest (1) and secure with the 2 screws (7).

    Tighten:  Tighten the 2 screws (7) to 2 N.m (18 lb in).

  2. Install the armrest (1) with hinge (8) to the floor console and secure with the 2 screws (6).

    Tighten:  Tighten the 2 screws (6) to 2 N.m (18 lb in).

  3. Close the console armrest (1).
scientia non olet · About LEMON Manuals