LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> GTO Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Right >> Removal Procedure

Removal Procedure

    Fig 1: View Of Right Closeout Panel, Stepwell Lamp, Retaining Lugs & Clips
    GM1356962Courtesy of GENERAL MOTORS CORP.
  1. Carefully pull the closeout panel (4) downwards to disengage the two retaining clips (1).
  2. Remove the closeout panel (4) from the hinge pillar panel, disengaging the two retaining lugs (3).
  3. Lower the closeout panel (4) and remove the stepwell lamp (2) by rotating the socket and removing from the closeout panel (4).
  4. Remove the closeout panel from the vehicle.
scientia non olet · About LEMON Manuals