LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> GTO Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Bracket Replacement - Instrument Panel (I/P) End Left >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper .
  2. Remove the fuse and relay panel.
    3. Fig 1: View Of Lever Assembly, Bracket & Retaining Tabs
    GM1236078Courtesy of GENERAL MOTORS CORP.
  3. Using a flat-bladed tool, lever the retaining tabs (1) top and bottom on the hood release lever bracket (2 and slide the lever assembly (3) rearward.
  4. Remove the drivers knee bolster reinforcement. Refer to Knee Bolster Reinforcement Replacement .
    5. Fig 2: View Of End Left Bracket & Screws
    GM1363465Courtesy of GENERAL MOTORS CORP.
  5. Remove the screw (4) attaching the end left bracket (3) to the vehicle.
  6. Remove the screw (1) attaching the end left bracket (3) to the steering column bracket.
  7. Remove the screw (2) attaching the end left bracket (3) to the dash panel.
  8. Remove the end left bracket assembly (3) from dash panel.
scientia non olet · About LEMON Manuals