LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Sunfire Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Plate Replacement - Instrument Panel (I/P) Accessory (Pontiac) >> Installation Procedure

Installation Procedure

  1. Align the tabs for the I/P trim plate (3) to the I/P carrier (1).
  2. Push the I/P trim plate (3) into the I/P carrier (1) to engage the retainers.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Installing I/P Accessory Trim Plate Screws (Pontiac)
    GM877984Courtesy of GENERAL MOTORS CORP.
  4. Install the I/P accessory trim plate screws (2).

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  5. Close the I/P compartment door.