LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Sunfire Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Cluster (Chevrolet) >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector for the cigar lighter, if equipped.
  2. Connect the electrical connectors for the headlamp dimmer switch.
  3. Align the retaining tabs (2) with the I/P carrier.
  4. Install the I/P cluster trim panel (3). Press the plate into the I/P carrier to engage the retainers (2).
    5. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Installing I/P Cluster Trim Panel Screws (Chevrolet)
    GM874860Courtesy of GENERAL MOTORS CORP.
  5. Install the screws (1) to the I/P cluster trim panel (3).

    Tighten:  Tighten the screws to 2.3 N.m (20 lb in).

  6. Install the I/P cluster trim panel (3). Refer to Trim Pad Replacement - Instrument Panel (I/P) (Chevrolet)  or Trim Pad Replacement - Instrument Panel (I/P) (Pontiac) .
  7. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 and SIR Disabling and Enabling Zone 5 in SIR.
scientia non olet · About LEMON Manuals