LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Sunfire Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Latch Replacement - Instrument Panel (I/P) Compartment >> Installation Procedure

Installation Procedure

    Fig 1: Installing (I/P) Compartment Door Latch
    GM740275Courtesy of GENERAL MOTORS CORP.
  1. Install the door latch handle to the I/P compartment door.
  2. Install the anti-rattle device to the door latch (2), if equipped.
  3. Install the door latch (2) to the I/P compartment door (3).
    4. NOTE: Refer toFastener Notice in Cautions and Notices.
    Fig 2: Identifying I/P Compartment Door Latch Screws
    GM834338Courtesy of GENERAL MOTORS CORP.
  4. Install the I/P compartment door latch screws (1).

    Tighten:  Tighten the screws to 2.3 N.m (20 lb in).

  5. Connect the anti-rattle device to the door latch mounting point, if equipped.
    6. Fig 3: Connecting (I/P) Compartment Door Latch Anti-Rattle Device
    GM740279Courtesy of GENERAL MOTORS CORP.
  6. Install the inner I/P reinforcement cover to the I/P compartment door. Refer to Door Replacement - Instrument Panel (I/P) Compartment .
  7. Inspect the I/P compartment door for proper operation.
  8. Close the I/P compartment door.
scientia non olet · About LEMON Manuals