LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Sunfire Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel (I/P) Outer Trim Cover Replacement (Pontiac) >> Installation Procedure

Installation Procedure

  1. Position the outer trim cover (1) to the I/P carrier.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Installing Outer Trim Cover Screw (Pontiac)
    GM874862Courtesy of GENERAL MOTORS CORP.
  2. Install the screw (2) to the outer trim cover (1).

    Tighten:  Tighten the screw to 2 N.m (18 lb in).

scientia non olet · About LEMON Manuals