Removal Procedure

On vehicles with manual transmission, release the snaps on the shift boot.

Fig 1: Loosening Shift Boot Snaps
Courtesy of GENERAL MOTORS CORP.
Using a small flat-bladed tool, remove the front bolt cover.

Fig 2: Removing Front Bolt Cover
Courtesy of GENERAL MOTORS CORP.
Using a small flat-bladed tool, remove the center storage pocket, if equipped.

Fig 3: Removing Center Storage Pocket

Courtesy of GENERAL MOTORS CORP.

Remove the power window switch plate, if equipped. Refer to Power Window Switch Replacement in Doors.
Raise the armrest (1) from the front floor console.
Remove the bolts (6) from the front floor console.

Fig 4: Removing Front Floor Console Mounting Bolts
Courtesy of GENERAL MOTORS CORP.
Remove the front floor console by lifting up and back. Guide the shift boot over the optional shift knob and over the park brake handle.

Fig 5: Aligning Front Floor Console
Courtesy of GENERAL MOTORS CORP.