Security Indicator Always On or Flashing

Step	Action	Yes	No
Schematic Reference: Theft Deterrent System Schematics Connector End View Reference: Theft Deterrent System Connector End Views
1	Did you perform A Diagnostic System Check-Theft Deterrent?	Go to Step 2	Go to Diagnostic System Check - Theft Deterrent
2	Install a scan tool. Turn ON the ignition leaving the engine OFF. With the scan tool, command the SECURITY indicator OFF. Does the SECURITY indicator turn off when commanded?	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems	Go to Step 3
3	Replace the instrument cluster. Refer to Instrument Panel Cluster (IPC) Replacement (Chevrolet) or Instrument Panel Cluster (IPC) Replacement (Pontiac) in Instrument Panel, Gages and Console. Did you complete the repair?	Go to Step 4	-
4	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2