Removal Procedure
- Open the I/P compartment.
- If the I/P compartment is equipped with a dampener, disengage the compartment door stop using the following procedure:
- Press the upper door stop (2) toward the center of the vehicle.
- Rotate the door away from the compartment.
Courtesy of GENERAL MOTORS CORP.
- If the I/P compartment is not equipped with a dampener, disengage the I/P compartment door stop as shown.
Courtesy of GENERAL MOTORS CORP.
- Rotate the door stop (1) to the right.
Courtesy of GENERAL MOTORS CORP.
- Remove the door stop (1).
Courtesy of GENERAL MOTORS CORP.