Installation Procedure
- Position the door stop (1) to the I/P compartment door.
Courtesy of GENERAL MOTORS CORP.
- Rotate the door stop (1) to the left.
Courtesy of GENERAL MOTORS CORP.
- If the I/P compartment is equipped with a dampener, engage the door stop using the following procedure:
- Press the upper door stop (2) toward the center of the vehicle.
- Rotate the door up to the compartment.
Courtesy of GENERAL MOTORS CORP.
- If the I/P compartment is not equipped with a dampener, engage the door stop as shown.
Courtesy of GENERAL MOTORS CORP.
- Close the I/P compartment.