LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Grand Prix GTP >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Knee Bolster Replacement - Right >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel (I/P) trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) .
  2. Outboard bolster only. Reposition the I/P accessory wiring junction block. Refer to Junction Block Replacement - Accessory Wiring in Wiring Systems.
  3. Outboard bolster only. Disconnect the wiring harness retainers (1, 2) from the I/P passenger knee bolster.
    4. Fig 1: Wiring Harness Retainers
    GM1204538Courtesy of GENERAL MOTORS CORP.
  4. Remove the I/P passenger knee bolster bolts. Inboard shown, outboard similar.
    5. Fig 2: I/P Passenger Right Knee Bolster
    GM929334Courtesy of GENERAL MOTORS CORP.
  5. Remove the I/P passenger knee bolster.
scientia non olet · About LEMON Manuals