LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Grand Prix GTP >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Head Up Display Replacement >> Removal Procedure

Removal Procedure

  1. Pull the I/P accessory trim plate rearward slightly for access to the steering column filler. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory .
  2. Remove the I/P steering column opening filler. Refer to Steering Column Filler Replacement .
  3. Remove the I/P cluster trim plate. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
  4. Remove the instrument cluster. Refer to Instrument Panel Cluster (IPC) Replacement .
  5. Remove the windshield pillar garnish moldings. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
    6. NOTE: Use the following method to disengage the Head Up Display (HUD) retainers. Do NOT pry the retainers with a flat-bladed tool or other similar device.
    1. Disengage the I/P upper trim panel retainers on the sides of the HUD.
    2. Disengage the retainer rearward of the HUD.

    Failure to follow this method could break the tab on the HUD.
  6. Remove the I/P upper trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Upper .
  7. Remove the HUD screw.
    8. Fig 1: View Of HUD Screw
    GM1198005Courtesy of GENERAL MOTORS CORP.
  8. Remove the HUD bolts.
    9. Fig 2: View Of HUD Bolts
    GM1198037Courtesy of GENERAL MOTORS CORP.
  9. Adjust the HUD for access. Disconnect the HUD electrical connector.
    10. Fig 3: View Of HUD Electrical Connector
    GM1200054Courtesy of GENERAL MOTORS CORP.
  10. Remove the HUD
scientia non olet · About LEMON Manuals