LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Grand Prix GTP >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Driver Information Center Replacement >> Removal Procedure

Removal Procedure

  1. Use a plastic trim tool to remove the ignition switch bezel.
  2. Fig 1: Identifying Ignition Cylinder Bezel
    GM910510Courtesy of GENERAL MOTORS CORP.
  3. Pull the instrument panel (I/P) accessory trim plate rearward.
  4. Fig 2: I/P Accessory Trim Plate
    GM928809Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connector from the driver information display assembly.
  6. Fig 3: Electrical Connector & Driver Information Display
    GM928828Courtesy of GENERAL MOTORS CORP.
  7. Remove the driver information display screws.
  8. Remove the driver information display.
  9. Fig 4: View Of Driver Information Display
    GM1203190Courtesy of GENERAL MOTORS CORP.