Removal Procedure
- Apply the park brake.
- Remove the floor console bolts from the sides of the console. Adjust the front seats as required.
- Shift the transaxle to 2.
- Remove the screw from the shift handle. Remove the shift handle.
- Pull the floor console rearward slightly. Disconnect the electrical connector at the front of the floor console.
- Remove the floor console.
- Remove the wiring harness.
- Remove the HUD switch, if equipped. Refer to Head Up Display Switch Replacement .
- Remove the traction control switch. Refer to Traction Control Switch Replacement in Anti-lock Brake System.
- Remove the accessory power receptacles. Refer to Cigar Lighter Housing Replacement - Floor Console and to Accessory Power Receptacle Replacement - Floor Console in Power Outlets.
- Remove the armrest and the hinge. Refer to Console Armrest Replacement - Front Floor .