Installation Procedure
- Align the I/P cluster trim bezel assembly to the I/P.
- Install the I/P cluster trim bezel assembly screw.
Tighten: Tighten the screw to 2 N.m (18 lb in).
- Install the I/P steering column opening filler assembly. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
- Install the I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory .
- Install the I/P compartment access hole cover to the I/P.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.