Fasten Safety Belt Warning

The BCM activates the fasten safety belt audible warning as requested by the seat belt switch. The BCM receives a discrete input from the seat belt switch for 8 seconds. The fasten safety belt warning soundsand the fasten safety belt indicator illuminates when the following occurs:

• The ignition switch transitions to ON.
• The BCM detects that the drivers seat belt is not buckled (signal is low).

If the seat belt is buckled when the ignition is turned on, the chime does not sound. If the seat belt is buckled while the chime is sounding, the chime stops. If the seat belt is unbuckled after the initial transition to ON, the chime does not sound.