LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Plate Replacement - Console >> Installation Procedure

Installation Procedure

  1. Install the cupholder. Refer to Cupholder Replacement - Front Floor Console .
  2. Install the traction control switch, if equipped. Refer to Traction Control Switch Replacement (Manual Transmission) and Traction Control Switch Replacement (Automatic Transmission) in Anti-lock Brakes System.
  3. Install the power window switch. Refer to Power Window Switch Replacement in Doors.
  4. Connect the power window switch and traction control switch connectors (3).
  5. Install the console trim plate (1) to the center console until the retaining tabs are engaged.
    6. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Install the screw (2) securing the console trim plate (1) to the center console.

    Tighten:  Tighten the screw to 2 N.m (18 lb in).

  7. Install the console tray insert. Refer to Console Tray Insert Replacement .
    8. Fig 1: View Of Trim Plate, Switch Connectors & Screw
    GM1355885Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals