Removal Procedure
- Release the steering column adjustment lever, move the column to its lowers position and lock into place with the adjustment lever.
- Remove the two screws (3) attaching the instrument cluster trim panel (2) to the instrument panel.
- Tilt the top of the cluster trim panel (2) away from the instrument panel and disengage the retaining clips (1) on each side.
- Unhook each retaining lug (4) from the instrument panel.
- Disconnect the wiring connector from the fuel filler door release switch.
- Remove the cluster trim panel (2) from the instrument panel.
- Remove the fuel filler door release switch, if necessary. Refer to Fuel Filler Door Release Switch Replacement
in Body Rear End.
Courtesy of GENERAL MOTORS CORP.