LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Cluster >> Installation Procedure

Installation Procedure

  1. Install the fuel filler door release switch, if removed. Refer to Fuel Filler Door Release Switch Replacement in Body Rear End.
  2. Connect the wiring connector to the fuel filler door release switch.
  3. Install the cluster trim panel (2) to the instrument panel, making sure the retaining lugs (4) and the retaining clips (1) are engaged.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the two screws attaching the instrument cluster trim panel (2) to the instrument panel.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  5. Move the steering column back to it's original position.
    6. Fig 1: View Of I/P Cluster Trim Panel, Retaining Clips, Screws & Retaining Lug
    GM1360211Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals