LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Knee Bolster Replacement - Left >> Installation Procedure

Installation Procedure

  1. Install the knee bolster reinforcement, if removed. Refer to Knee Bolster Reinforcement Replacement .
  2. Position the right-hand side of knee bolster panel (2) to the lower instrument panel, making sure the knee bolster trim panel (2) is engaged to the retaining pin.
  3. Install the left-hand side of the knee bolster panel (2) to the lower instrument panel, making sure the knee bolster clip (1) is fully engaged.
  4. Swing the knee bolster panel (2) upwards, making sure the three retaining clips (3) are fully engaged.
    5. Fig 1: View Of Upper Edge Of Panel, Trim Panel & Retaining Clips
    GM1357924Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals