LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

  1. Connect the wiring connector and locking tab (3) to the back of the cluster (2).
  2. Install the cluster (2) to the instrument panel.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the 4 screws (1) attaching the instrument cluster (2) to the instrument panel.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  4. Install the instrument cluster trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
    5. Fig 1: View Of Instrument Cluster, Wiring Connector Lock Tab & Screws
    GM1360391Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals