Removal Procedure
- Remove the instrument panel compartment/ashtray. Refer to Ashtray Replacement .
- Remove the left knee bolster trim panel, if necessary. Refer to Knee Bolster Replacement - Left .
- Remove the three screws (1) attaching the instrument panel lower extension (2) to the instrument panel.
- Remove the screw attaching the floor console front duct, if necessary.
- Grip the top of the lower extension (2) and pull rearwards to release the retaining clip (5).
- Disconnect the wiring connector (4) from the rear compartment release switch (3).
- Remove the rear compartment release switch (3). Refer to Rear Compartment Lid Switch Replacement
in Body Rear End.
Courtesy of GENERAL MOTORS CORP.