LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Driver Information Center Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel cluster trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster .
  2. Remove the instrument panel center trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center .
  3. Remove the HVAC control assembly. Refer to HVAC Control Assembly Replacement in HVAC.
  4. From the rear of the switch (3), squeeze the retaining clips (2) on each side of the switch (3) and push the switch (3) part way from the panel (4).
  5. Using a plastic flat-bladed tool, hold the retaining clips (2) depressed while slowly removing the switch (3) from the panel (4).
  6. Disconnect the wiring connector (1) and remove the switch (3) from the vehicle.
    7. Fig 1: View Of Wiring Connector, Switch, Panel & Retaining Clips
    GM1361075Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals