Installation Procedure
- Install the armrest inner panel (5) to the armrest (1) and secure with the 4 screws (4), if removed.
Tighten: Tighten the 4 screws (4) to 2 N.m (18 lb in).
- Install the console armrest latch (2), if removed. Refer to Latch Replacement - Console Compartment Door .
- Install the armrest hinge (8). Refer to Hinge Replacement - Floor Console Arm Rest .
- Close the floor console armrest (1).
NOTE:
Refer to Fastener Notice
in Cautions and Notices.