LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> GTO Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Right >> Installation Procedure

Installation Procedure

  1. Install the stepwell lamp (2) to the closeout panel (4) by rotating the socket to fasten.
  2. Position the closeout panel (4) to the vehicle making sure the retaining lugs (3) are engaged to the hinge pillar panel.
  3. Push up on the closeout panel (4) making sure the two retaining clips (1) are engaged.
    4. Fig 1: View Of Right Closeout Panel, Stepwell Lamp, Retaining Lugs & Clips
    GM1356962Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals