LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe GT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical - 1.8L (LV6)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Positive Crankcase Ventilation (PCV) Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
NOTE: Refer to COMPONENT FASTENER TIGHTENING NOTICE .
  1. Install the PCV valve (1) into the cylinder head.

    Tighten 

    Tighten the PCV valve to 27 N.m (13 lb ft).

  2. Connect the PCV valve hose (3) to the PCV valve (1).
  3. Secure the PCV valve hose with one clamp (2).
    Fig 1: Locating PCV Valve
    G01546688Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals