LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe GT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical - 1.8L (LV6)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the oil level indicator from the guide tube.
  2. Unclip the crankshaft position sensor electrical connector from the guide tube.
  3. Remove the following components from the cylinder block:
    • The bolts
    • The guide tube (3)
  4. Remove the guide tube seal (1) from the guide tube.
    Fig 1: Removing Oil Level Indicator & Tube
    G01546681Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals