LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe GT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical - 1.8L (LV6)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Tensioner Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
CAUTION: Refer to BATTERY DISCONNECT CAUTION .
  1. Disconnect the negative battery cable.
  2. Remove the accessory drive belt. Refer to DRIVE BELT REPLACEMENT  .
  3. Remove the lower drive belt tensioner bolt (6).
  4. Remove the upper drive belt tensioner nut and slide the assembly off the stud.
    Fig 1: Removing Drive Belt Tensioner
    G01546675Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals