LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe GT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Mechanical - 1.8L (LV6)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Intake Camshaft and Lifter Removal

Intake Camshaft and Lifter Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the intake camshaft sprocket bolt.
    Fig 1: Removing Intake Camshaft Sprocket Bolt
    G01546863Courtesy of GENERAL MOTORS CORP.
  2. Remove the cam shaft sprocket.
    Fig 2: Removing Cam Shaft Sprocket
    G01546864Courtesy of GENERAL MOTORS CORP.
  3. Remove the intake camshaft bearing cap bolts in sequence. Starting at the ends and working toward the center of the camshaft.
  4. Remove the front camshaft bearing cap (5).
  5. Remove the intake camshaft from the cylinder head.
    Fig 3: Identifying Intake Camshaft Bearing Cap Bolts Tightening Sequence
    G01546865Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals