Visual/Physical Inspection
WARNING: This page is about a different variant/trim than selected.
- Inspect for aftermarket devices which could affect the operation of the Engine. Refer to CHECKING AFTERMARKET ACCESSORIES in Wiring Systems.
- Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
- Check for the correct oil level, proper oil viscosity, and correct filter application.
- Verify the exact operating conditions under which the concern exists. Note factors such as engine RPM, ambient temperature, engine temperature, amount of engine warm-up time, and other specifics.
- Compare the engine sounds, if applicable, to a known good engine and make sure you are not trying to correct a normal condition.