LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Removal & Installation >> Air Bag Modules >> Removal & Installation (Passenger-side)

Removal & Installation (Passenger-side)

  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See ZONE 5  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Remove glove box. Remove Connector Position Assurance (CPA) clip from air bag module connector and disconnect passenger-side air bag module connector. See Figure. Remove passenger-side air bag module mounting nuts and bolt. See Fig 1. Remove passenger-side air bag module from instrument panel.
  3. To install, reverse removal procedure. Tighten passenger-side air bag module mounting nuts and bolt to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See ZONE 5  under DISABLING & ACTIVATING AIR BAG SYSTEM.
Fig 1: Identifying Passenger-side Air Bag Module
G99H27653Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals