LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Automatic Transmission - Mu4) >> Automatic Transmission Oil Cooler >> Torque Converter Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission. Refer to REMOVAL & INSTALLATION - A/T (FWD)
  2. Remove the torque converter (1) from transmission.
  3. Remove the following from the torque converter:
    1. 3.1 The torque converter seal bolts.
    2. 3.2 The torque converter seal.
  4. Remove the input shaft seal from input shaft.
    Fig 1: Removing Input Shaft Seal From Input Shaft
    G03415511Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals