LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Automatic Transmission - Mu4) >> Automatic Transmission Oil Cooler >> Filler Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the filler tube into the transaxle. Seat the filler tube fully.
  2. Install the fluid fill tube bracket bolt into the fluid filler tube bracket.
  3. Install the filler tube bracket bolt.

    Tighten 

    Tighten the filler tube bracket bolt to 5.5 N.m (49 lb in).

  4. Install the fluid level indicator into the filler tube.
  5. Refill the transaxle, as necessary Refer to TRANSMISSION FLUID CHECKING PROCEDURE TRANSMISSION FLUID CHECKING PROCEDURE .
scientia non olet · About LEMON Manuals