LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transmission Removal & Installation - (Fwd)) >> Removal & Installation >> Transaxle Mount (Rear) >> Removal

Transaxle Mount (Rear): Removal

WARNING: This page is about a different variant/trim than selected.
  1. Install the engine support fixture to support the engine.
  2. Remove the rear mount through bolt. See Figure .
  3. Raise and suitably support the vehicle.
  4. Remove the 3 nuts and one bolt securing the rear mount to the transmission support. See Figure .
  5. Lower the vehicle.
  6. Remove the rear transaxle mount from the vehicle.