LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transmission Removal & Installation - (Fwd)) >> Removal & Installation >> Transaxle Mount (Front) >> Removal

Transaxle Mount (Front): Removal

WARNING: This page is about a different variant/trim than selected.
  1. Install the engine support fixture.
  2. Raise the vehicle.
  3. Remove the left hand splash shield.
  4. Remove the right hand splash shield.
  5. Remove the 2 bolts from the front transaxle mount.
  6. Remove the front transaxle mount through bolt. See Figure .
  7. Remove the insulator to the mount bracket.
  8. Remove the 2 front transaxle bracket bolts and bracket from the transaxle.
scientia non olet · About LEMON Manuals