LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission Servicing - (Fwd)) >> Removal & Installation >> Vehicle Speed Sensor >> Installation

Vehicle Speed Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply Transmission Assembly Lubricant (J-36850) to the VSS "O" ring.
  2. Install the VSS into the transaxle case. Secure the VSS (2) with the retaining bolt (1). See Figure . Tighten bolt to specification. See TORQUE SPECIFICATIONS  .
  3. Connect the VSS electrical connector. See Figure .
  4. Connect the negative (-) battery cable.
scientia non olet · About LEMON Manuals