LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Body Front End) >> Repair Instructions >> Seal Replacement - Hood Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Hood Seal
    GM821323Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the hood.
  2. Remove the following components from the vehicle:
    • The rear hood seal (1).
    • The 7 plastic retainers.
scientia non olet · About LEMON Manuals