LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Body Front End) >> Repair Instructions >> Hood Latch Release Handle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hood Latch Cable And Release Handle
    GM432117Courtesy of GENERAL MOTORS CORP.
  1. Install the hood latch release cable (1) to the hood latch release handle (2).
    2. Fig 2: Install Hood Release Latch Handle
    GM432120Courtesy of GENERAL MOTORS CORP.
  2. Install the hood release latch handle (1) to the I/P drivers knee bolster trim (2).
scientia non olet · About LEMON Manuals