LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Wheel Cylinder >> Installation

Wheel Cylinder: Installation

  1. Install the wheel cylinder. Install the wheel cylinder bolts. Tighten the bolts to specifications. See TORQUE SPECIFICATIONS  .
  2. Remove the cap from the brake pipe and install the brake pipe to the wheel cylinder. Tighten the nut to specifications. See TORQUE SPECIFICATIONS  .
  3. Install brake shoes. Adjust the brake shoes. See ADJUSTMENT  under DRUM BRAKES in ADJUSTMENTS & INSPECTIONS. Install the brake drum. See BRAKE DRUM  . Bleed the hydraulic brake system. See BLEEDING BRAKE SYSTEM  . Install the tire and wheel. Lower the vehicle.
scientia non olet · About LEMON Manuals