Removal Procedure
- Remove the manual transmission shift knob, if equipped.
- Remove the center A/C control knob (3).
- Remove the screw (1).
- Using a taped flat bladed tool, gently pry and release the retaining clips which secure the front floor console trim plate (2) to the front floor console assembly.
- Disconnect the following components:
- The 2 cigar lighter electrical connectors
- The accessory power receptacle electrical connectors
- Remove the cigar lighter assembly, if necessary. Refer to CIGAR LIGHTER REPLACEMENT
.
Courtesy of GENERAL MOTORS CORP.
- Remove the accessory power receptacle, if necessary. Refer to ACCESSORY POWER RECEPTACLE REPLACEMENT
in Wiring Systems.