LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Center >> Removal Procedure

Removal Procedure

  1. Using a taped flat bladed tool, gently pry and release the retaining clips which secure the IP accessory center trim plate (1) to the instrument panel assembly  .
  2. Disconnect the following components:
    • The A/C switch electrical connector
    • The hazard warning switch electrical connector
    • The rear defogger switch electrical connector
    • The passenger seat belt indicator electrical connector
  3. Remove the A/C switch, if necessary. Refer to HVAC CONTROL ASSEMBLY REPLACEMENT (CONTROL ASSEMBLY) or HVAC CONTROL ASSEMBLY REPLACEMENT (A/C SWITCH) in HVAC Systems - Manual.
  4. Remove the hazard warning switch, if necessary. Refer to HAZARD WARNING SWITCH REPLACEMENT - ON VEHICLE .
  5. Remove the rear defogger switch, if necessary. Refer to REAR WINDOW DEFOGGER SWITCH REPLACEMENT .
    Fig 1: Removing Instrument Panel Accessory Center Trim Plate
    G01433989Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals