LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Center >> Installation Procedure

Installation Procedure

  1. Install the rear defogger switch, if removed. Refer to REAR WINDOW DEFOGGER SWITCH REPLACEMENT .
  2. Install the hazard warning switch, if removed. Refer to HAZARD WARNING SWITCH REPLACEMENT - ON VEHICLE .
  3. Install the A/C switch, if removed. Refer to HVAC CONTROL ASSEMBLY REPLACEMENT (CONTROL ASSEMBLY) or HVAC CONTROL ASSEMBLY REPLACEMENT (A/C SWITCH) in HVAC Systems - Manual.
  4. Connect the following components:
    • The passenger seat belt indicator electrical connector
    • The rear defogger switch electrical connector
    • The hazard warning switch electrical connector
    • The A/C switch electrical connector
  5. Install the IP accessory center trim plate (1) to the IP assembly. Ensure that the retaining clips are fully engaged.
    Fig 1: Installing Instrument Panel Accessory Center Trim Plate
    G01433990Courtesy of GENERAL MOTORS CORP.