LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Instrument Panel (I/P) Harness Replacement >> Installation Procedure

Installation Procedure

  1. Install the instrument panel wiring harness (5) to the instrument panel (2). Secure the harness with the following:
    • The wire harness retainers
    • The screws
  2. Install the left I/P outer air outlet to the instrument panel assembly. Secure the duct with the plastic retainer.
  3. Install the right I/P outer air outlet to the instrument panel assembly. Secure the duct with the screw.
  4. Install the lower instrument panel assembly. Refer to INSTRUMENT PANEL (I/P) TRIM PANEL REPLACEMENT - LOWER  .
  5. Install the upper instrument panel assembly. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER  .
    Fig 1: Installing Instrument Panel Harness
    G01434027Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals