LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Bracket Replacement - Instrument Panel (I/P) Center Support >> Removal Procedure

Removal Procedure

  1. Remove the upper instrument panel assembly. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER  .
  2. Remove the lower instrument panel assembly. Refer to INSTRUMENT PANEL (I/P) TRIM PANEL REPLACEMENT - LOWER  .
  3. Remove the connector housing bracket from the right I/P center support brace.
  4. Remove the following components from the vehicle:
    • The left brace nut (10)
    • The right brace nut (5)
    • The left brace bolt (8)
    • The right brace bolt (7)
    • The left I/P center support brace (9)
    • The right I/P center support brace (6)
      Fig 1: Removing Connector Housing Bracket From Right Instrument Panel Center Support Brace
      G01434004Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals