LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2003 >> Vibe Base, FWD, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> 12-Volt Power Supply Replacement >> Removal Procedure

Removal Procedure

  1. Remove the rear floor console. Refer to CONSOLE REPLACEMENT - REAR FLOOR  .
  2. Turn the socket in a counter clockwise direction.
  3. Disengage the tab between the socket and cover.
  4. Align the socket with the notch and remove socket assembly.
    Fig 1: Removing Power Supply Socket
    G01434010Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals